How to Use a Nemco Easy Juicer
Fresh juices for marinades and beverages is easy with commercial food prep equipment. If you just took the unit out of the box or it’s your first day on the job and you’re uncertain how to operate it, Parts Town has you covered. This guide will walk you through how to use a Nemco Easy Juicer.
This guide is applicable to most Nemco juicers, such as the 55850.
Using a Nemco Easy Juicer
- Step 1. Raise the squeezer - To place your fruit or product into the juicer, you need to raise the squeezer by rotating the lever clockwise.
- Step 2. Place a collector - Put a bowl, cup or other collector under the juicer so juice doesn’t go all over your counter.
- Step 3. Prep the product - Before you juice your fruit or product, cut it in half first.
- Step 4. Load the juicer - Place your product onto the juicer’s cone with the flat side facing down.
- Step 5. Make the juice - Rotate the lever to bring down the squeezer so it crushes the fruit or product and creates juice. The juice will come out of the bottom and be collected by the container you placed below.
- Step 6. Unload product - Once no more juice is being produced by squeezing, rotate the lever to lift the squeezer.
- Step 7. Discard product - Remove and discard the product from the juicer.
Need to learn more about your Nemco equipment? Get helpful guides on maintenance, operational or troubleshooting steps with our collection of manuals and diagrams.